TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Pro Tool Reviews tested Yeti LoadOut KOR Protective Inserts in a wheeled GoBox 28 with meters and other equipment. The inserts held gear in place and cushioned routine transport in the reviewer’s tests, but a glass-breaking impact showed they are not protection against severe abuse; fit, setup and cost are also considerations.
Pro Tool Reviews tested Yeti’s LoadOut KOR Protective Inserts in a wheeled LoadOut GoBox 28, using meters and other equipment to assess whether the customizable cushioning could suit professional jobsite transport. The reviewer found that the inserts held gear securely during ordinary truck travel, but said they should not be treated as protection against severe impacts.
The KOR system uses a double-layer insert with a durable outer skin and cushioning beads. The reviewer said neither Yeti nor KOR identifies the bead material. Users place equipment between the layers, close the valve and use a pump to remove air until the insert feels rigid. Opening the valve lets air back in so the insert can be reshaped. The reviewer said resetting took about a minute, although KOR says it can take as little as 30 seconds.
Each insert set is made for a specific GoBox size, according to the review; the sets are not interchangeable between sizes and are not designed for coolers or other storage. The reviewer tested an NCVT, voltmeters and a vehicle scanner, as well as binoculars, a flashlight and a Bluetooth speaker. None was damaged during the reviewer’s truck-ride tests. The reviewer also reported that an empty glass jar survived being struck on top with a pry bar.
A separate test showed a clear limit: a thin glass placed in the GoBox broke after the reviewer kicked the box down a dock staircase. The insert was not punctured by the fragments, and the GoBox remained intact apart from marks. The reviewer cautioned that the inserts may reduce movement and cushion ordinary bumps, but cannot prevent damage in sufficiently hard impacts.
A Fit for Meters, Not Hard Impacts
For tradespeople who carry test and measurement equipment, preventing tools from shifting or striking one another can help reduce the risk of damage during transport. The review’s tests suggest KOR inserts may be useful when equipment fits properly and the insert is set up to hold it firmly. That is a practical distinction for electrical, utility and other field work where a damaged meter can interrupt a job.
The review does not establish a guaranteed level of impact protection or show that the inserts have been independently tested to a published standard. Buyers should treat the reported results as one reviewer’s hands-on testing, not a certification that sensitive equipment will survive every drop, collision or jobsite condition. Cost is another stated drawback, though the supplied source does not give a price.
Products Worth Considering
DEWALT 20V MAX XR Brushless 3-Speed Oscillating Multi-Tool Kit (DCS356C1)
DEWALT 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw (DWE7485)
RYOBI ONE+ HP 18V Brushless Cordless 8-1/4-Inch Portable Table Saw Kit
As an affiliate, we earn on qualifying purchases.
How the GoBox Inserts Work
The inserts are intended to conform around gear inside a Yeti LoadOut GoBox, filling available space so items do not shift. The review stresses that leaving room above the packed gear can undermine that purpose. It also advises keeping equipment away from the box edges, where protection may be thinner, and pumping the insert until it holds the load securely rather than leaving extra air that could allow movement.
For tall or bulky equipment, the reviewer found it easier to use two single-layer inserts instead of one connected double-layer piece, which sometimes could not cover the full load. The reviewer said an air gap at the sides may remain, but the gear can still be held in place if the GoBox lid presses on the top insert when latched. The review also notes that the wheeled GoBox’s wheel wells affect usable space; the source excerpt does not provide further detail on that point.
“Customizable shape”
— Pro Tool Reviews
Protection Limits and Missing Details
The supplied review does not state the inserts’ price, identify the material inside the cushioning beads, or report standardized impact-test results. It also does not provide a measured comparison with foam or other protective systems; the reviewer’s view that the inserts absorbed vibration and impact better than some alternatives comes from hands-on testing.
The reported tests cover a selection of gear and particular conditions, not every tool, GoBox size or type of jobsite transport. How well an individual load is protected depends on fit and packing, including whether the insert fills the box and keeps equipment away from its edges. The review’s glass test also indicates that severe impacts can still break fragile contents.
Check Fit Before Buying
Readers considering the system should check that the insert is made for their exact GoBox size, confirm that the gear can be packed without leaving substantial space, and account for bringing the pump. The review suggests testing the arrangement with the actual equipment, particularly when packing tall items or using a wheeled box with wheel wells.
The supplied source contains no announcement of further testing, product changes or a jobsite certification. Its practical takeaway remains limited to the review’s reported trials: KOR inserts can hold varied gear securely when properly fitted, but they should not replace equipment-specific protection where a hard impact could cause damage.
Key Questions
Are Yeti LoadOut KOR Protective Inserts suitable for jobsite equipment?
The Pro Tool Reviews tester found them useful for holding meters and other equipment in a GoBox during truck travel. The review does not establish certified protection for all jobsite conditions, so results may vary with the gear, fit and impacts involved.
Do the inserts protect equipment from drops or severe impacts?
The review reports that a thin glass broke after the GoBox was kicked down a dock staircase. The reviewer concluded that the inserts can cushion and stabilize gear but should not be relied on to prevent damage from sufficiently hard impacts.
Will one KOR insert fit different GoBox sizes?
No. According to the review, each insert set is specific to a LoadOut GoBox size and is not interchangeable with other sizes or designed for Yeti coolers.
What is required to set up the KOR inserts?
Place the gear between the insert layers, close the valve and use the pump to remove air until the insert feels rigid. The reviewer said a reset took about a minute and listed remembering to bring the pump as a drawback.
What should users check when packing the GoBox?
The review advises filling the space so gear cannot shift, keeping items away from the GoBox edges and avoiding under-pumping. For tall loads, the reviewer found that two single-layer inserts could be easier to arrange than the connected double-layer insert.
Source: protoolreviews.com
